The Boss wants a new set of kitchen chairs to go with the kitchen table I made last winter. I started the prototype today.

Curly maple seat close-up

Picture 2 of 11

Close-up of curly maple seat in the chairs.

The legs and seat rails are made of cherry, and the back rails are maple. The seat will also be maple. I’ll update this as this prototype is finished and more come into existence.

23 April 2017: legs tapered. Everything on the chair sanded and assembled. All mortise-&-tenon joints pinned with walnut dowels. Finally, two braces installed on the insides of each leg joint – one high and one low on the joint. Only one of these inner braces is installed right now; the second set will be installed after the seat is attached. Hopefully, this is enough stabilization of these joints to allow me to get away with no lower struts on the legs.

23 August 2017: Finally, all the chairs are finished, so the kitchen table and chair set is complete!

Share